Skip to main content Skip to search Skip to main navigation

Sleepline or Stretch Top? For spare parts it makes no difference.

Still, give us a quick call before ordering – with a few measurements and a photo of the edge, it is quickly clear what belongs in your bed.

Phone: +49 6887 912 9180 – Monday to Saturday, 8 am to 8 pm (advice in German) · Email: info@betten-conrad.de

TTI Royal Sleepline

Royal Sleepline was the second brand of the Belgian manufacturer TTI. It was created not because the beds were different, but because territorial protection made it impossible to supply two retailers in the same area with the same brand. For anyone looking for spare parts today, that makes things easier than expected.

An anchor instead of an elephant

The difference between the two brands lies in the colour and the sticker on the cover: Sleepline has an anchor printed on it, Stretch Top an elephant. The cut of the water mattress and the cover is identical. So if you find an anchor on the cover, you can go by the Stretch Top range.

T-profile and L-profile

Sleepline beds came with two shapes of the profile that sits under the upper foam edge: a T-profile and an L-profile. This has no effect on the water mattress; the inner dimensions stay the same. For the cover and for replacement parts at the edge, however, the distinction matters – a photo of the edge is enough for us to clarify it.

Which water mattress fits

Available are Uno (mono) with one continuous water chamber and Dual with two separate chambers and a thermal divider. The vinyl is phthalate-free Mesamoll 2, the guarantee is 10 years, and you choose the stabilisation in levels. You will find the sizes in the category Water mattress to fit TTI Stretch Top – it also covers the Sleepline beds. For Sleepline beds there is also a separate category Water mattress to fit Royal Sleep Line.

The TTI-typical width of 190 cm also turns up with Sleepline. A standard size usually fits anyway; if not, we have one made to measure. That takes two to three weeks and costs about twice as much.

The details we need

The inner length and width of the foam frame – measured on the frame, not on the old mattress –, the height of the frame, the number of water chambers and the shape of the edge. If possible, add a photo of the bed and of the sticker on the cover.

Send the details to info@betten-conrad.de or call us: +49 6887 912 9180, Monday to Saturday from 8 am to 8 pm.

Back to the overview: TTI waterbeds