Not sure which stabilisation suits you? Call us: +49 6887 912 9180 (advice in German) – we advise you free of charge and find the right level for your waterbed together.
Stabilisation levels of water mattresses
When you buy a new water mattress, you choose a stabilisation level as well as the size and type. It determines how much the water moves when you lie down or turn over – from a pronounced wave feeling to an almost still lying surface. Here we show how the levels are built and which one suits whom.
What does stabilisation mean?
In an unstabilised water mattress, the water can move freely. Every movement sets off a wave that continues for a while. To keep this from being too strong, stabilised mattresses contain fibre layers in the water core. They slow down the flow – the more layers, the shorter and weaker the after-motion.
The percentage describes how strong this damping is: 0 % stands for free water, 100 % for a fully stabilised mattress that hardly moves at all.
Stabilisation is not the same as firmness
A common misunderstanding: a more strongly stabilised mattress is not automatically firmer. On a waterbed, you set how firm or soft you lie with the amount of water. The stabilisation only decides how much movement remains in the water.
The levels at a glance
The illustrations show the construction from the unstabilised to the fully stabilised water mattress. Each level is briefly described below its illustration.

0 % – unstabilised (Free Flow)
No fibre in the water core. The water moves freely and the mattress keeps moving noticeably and for a long time – the classic waterbed feeling.

20 % – lightly stabilised
One fibre layer takes the edge off the wave. The movement remains clearly noticeable but fades faster.

40 % – semi-stabilised
Two fibre layers dampen noticeably. A gentle rocking remains, but the bed settles quickly.

60 % – stabilised with lumbar support
Several fibre layers and an additional layer in the pelvic area. For many, a good middle way between water feeling and calm.

80 % – highly stabilised
Even more fibre, plus the lumbar support. Movements are largely absorbed. The 90 % version lies between this level and the fully stabilised one.

100 % – fully stabilised
Many fibre layers plus lumbar support. The mattress hardly moves at all and feels almost like a conventional mattress.
Which level suits me?
There is no fixed rule – it depends on how much movement you like. As a guide:
If you enjoy floating on the water and tend to lie still, you will feel comfortable with 0 to 40 %.
If you want to keep some water feeling but not rock for long, you will usually choose 60 or 80 %.
If you are switching from a conventional mattress, often turn at night or sleep on your stomach, 90 or 100 % is a good choice.
If you are replacing an old water mattress and were happy with how it felt, it is best to choose the same level again. If it is no longer on the label, we will help you on the phone.
The lumbar support
From 60 %, our illustrations show an additional, smaller fibre layer in the middle of the mattress. This lumbar support sits in the area of the pelvis and lower back and gives a little more support there. With many of our replacement water mattresses you can select it as the option "with support".
Stabilisation in our complete beds
With the complete waterbeds you choose from four levels: unstabilised (Free Flow), half stabilised, three-quarters stabilised or fully stabilised. That corresponds roughly to 0, 50, 75 and 100 %.
Mono or Dual: stabilisation per side
A mono water mattress, also called Uno, has one large water chamber across the whole lying surface – even in a double bed. Here one stabilisation level applies to both sleepers. With a dual water mattress, two separate water chambers lie side by side. Each side can have its own level, and the partner's movements hardly reach the other side.

Mono / Uno
One water chamber for the whole lying surface – one stabilisation level for both sleepers.

Dual
Two separate water chambers with a divider – each side with its own stabilisation level.
Frequently asked questions
Can I change the stabilisation later?
The fibre layers lie inside the welded water core. If you want a different level, you therefore need a new water mattress – which makes the right choice at purchase all the more important.
Is every level available for every bed?
Most of our replacement water mattresses are available in 0, 20, 40, 60, 80, 90 and 100 %. Which levels are available for your model is shown on the respective product page. For older beds or special sizes, it is best to call us first.
You will find suitable models in our category Water mattresses, water cores and water bags. Read more about types and dimensions in the water mattress guide.