Bodytone waterbeds
For years Bodytone was one of the better-known waterbed brands in German-speaking countries. The company behind it has not existed for more than ten years – but the beds themselves are still in many bedrooms and can be used without any problem. What is missing are spare parts from the manufacturer. That is exactly what we supply: made-to-measure water mattresses, covers, heaters and accessories for all Bodytone ranges.
Who was Bodytone?
The brand belonged to The Sleeping Society NV, Rupelweg 11, B-2850 Boom near Antwerp; for a time the company was based in Edegem, and in April 2002 its own factory in Luxembourg was added. In Germany, Bodytone was present through specialist retailers from the mid-1990s and was regarded as an upmarket brand – TÜV Rheinland tested the beds for ergonomics, durability and freedom from harmful substances, among other things. The brand's slogan was "Innovation for pure sleep".
In 2014 it was all over: the stocks of raw materials and waterbed components were auctioned in Belgium in late summer 2014, after which the brand disappeared from the market. Original spare parts have not been available since then, not even through the former specialist retailers.
What made Bodytone special
Bodytone sold more than a water core in a foam frame. The mattresses had a three-zone surface, a double-bonded stabilising fibre with fine-mesh nylon netting, 3D corner caps made of three-layer special vinyl and a heat-conducting base called BODYtherm. For the Exklusiv mattress the manufacturer advertised its own cylinder technology, and at extra cost there was the PCS – a Personal Comfort System that made the lumbar support adjustable for one or two people.
Besides the waterbeds, there was Bioactive, a range of viscoelastic conventional mattresses, and the system mattress: a double bed with one side as a waterbed and the other as a conventional mattress. For you this means today: not every Bodytone double bed contains two water cores. Check what is actually fitted before you order.
The 2008 range
The last price list we have, from 2008, lists four complete beds: Comfort, Exklusive, Coupé "Plus" and Coupé "Standard" – the "Plus" had no meaning of its own; it was simply added to the name at the time. Such a bed cost about 1,450 to 4,400 euros back then, depending on size, mattress and features, and was delivered complete – with base board, safety liner, liner, heater, base (24 cm) and cover. In the spare-parts trade the names Classic, Comfort and Exclusive have become established, and our categories are sorted accordingly.
Bodytone Comfort
The Comfort bed has a straight-cut softside surround: a foam profile in two densities, attached with Velcro to a plastic profile, with the safety liner and a base board in Supersoft black or white underneath. The water core therefore has a vertical side wall. You will find matching cores in the category Water mattress to fit Bodytone Comfort.
Bodytone Exclusive
The Exklusive beds – now usually spelt Exclusive – were the upmarket series: base board and plastic profile in foil (beech, maple, cherry, silver or black), also with two foam densities and Velcro fastening. They came with the Exklusiv mattress with cylinder technology. You will find matching cores in the category Water mattress to fit Bodytone Exclusive.
Bodytone Classic and Coupé
You can recognise the Coupé beds by the edge sloping inwards: at the top a narrow border of about four centimetres with Velcro fastening, below it the angled foam profile. The mattress is therefore made with an angled cut. The Coupé "Standard" contained the Classic mattress – hence the name commonly used today. You will find matching cores in the category Water mattress to fit Bodytone Classic.
Mattress types and stabilisation
Bodytone offered four mattress types, each as Uno (one continuous core) or Dual (two chambers with a thermal divider): the Comfort mattress with fibre support in levels 5000, 7000 and 10000; the Exklusiv mattress with cylinder technology in 775, 1175 and 1575; the Supréme with spacer fabric as AIR 7 and AIR 10; and the Classic mattress in FF (Freeflow, without stabilisation), 5000, 7000, 10,000 and 10,001. Comfort, Exklusiv and Supréme were also available with an angled cut for the Coupé base.
The number stands for the degree of stabilisation: the higher it is, the calmer the water. Our replacement cores have their own scale from free-flow to highly stabilised. Just tell us which level was in your bed before – we will match it.
Our tip: give us a quick call before you order.
Not sure which range is in your bedroom? From the construction of the bed parts, the colour and embossing of the old mattress and the shape of the edge, the type can usually be clarified on the phone – even if there is no longer a label on the bed. Phone +49 6887 912 9180, Monday to Saturday 8 am to 8 pm (advice in German), or info@betten-conrad.de.
Identifying your Bodytone bed
The quickest way is the label: on softside beds it is usually on the cover or on the old water core. If it is missing, three details help – the inner length and width of the foam frame, the frame height and the layout: one continuous core (Uno, also called mono) or two separate chambers (Dual). How to measure correctly is explained in detail in the water mattress guide.
Bodytone made beds from 90 x 200 to 222 x 242 cm, including odd sizes such as 122 x 222, 180 x 210, 205 x 235 or 222 x 222 – sizes that are not available off the shelf. That is exactly why we manufacture to your specifications. Always measure the inside of the foam frame, not the old water core: a core that has been under pressure for years has stretched and gives a measurement that is too large.
Replacement water mattresses for Bodytone
Our replacement cores are made to measure and match the originals in construction. They are made of phthalate-free vinyl with the Mesamoll 2 plasticiser system; we give a ten-year guarantee and usually deliver within a few days. If you were happy with how your bed felt, it is best to stay with the stabilisation level you are used to.
We make special sizes on request. With dual beds you can replace one side individually; it usually makes sense to replace both cores, though, because otherwise the two sides feel different.
Covers, heater and accessories
The Bodytone cover is pulled over the upper part of the surround and held at the bottom with a Velcro border; on some versions a zip runs all the way round. That is exactly how we sew matching waterbed covers to measure in our own workshop – with your existing zip if it is still in good condition. There were separate covers for the hardside beds; you can get those from us too.
Originally an IRCA film heater, a Sigma ceramic heater or the digital Carbon IQ heater was fitted, along with liners and protective liners, conditioner, vinyl cleaner and cream, a bleeder pump and Bubble-Stop. You will find suitable replacements for all of these in our accessories.
What else Bodytone built
Besides the softside beds, Bodytone offered hardside mattresses in the same versions (Comfort, Exklusiv, Supréme) together with Stand-Up and Permaflex liners. There were also special shapes: the round Rondo softside bed and the eight-sided Octagonal bed.
The headboards and bed frames had names such as Antonio, Balance, Flako, Vision, Leonardo, Linda, Raffaello, Romero, Relax, New Stefanie, Old Stefanie, Umberto, Virage and Paolo. If you find one of these names in your old documents, you can be sure you have a Bodytone bed.
Also in the range: the lightweight Smart water mattress with a foam frame, a baby waterbed in 60 x 120 and 70 x 140 cm with its own 75-watt ceramic heater, a dog waterbed with an imitation-leather cover and the conventional mattresses Bioactive Air and Memo – the latter also with a massage function – as well as pillows such as Boomerang, wedge pillow and Memo Pillow.
Frequently asked questions about Bodytone
Are original Bodytone mattresses still available?
No. Since production ended, no more originals have been made. Our cores are reproductions made to the dimensions of your bed – they fit the existing foam frame and are installed exactly like the old core.
My old mattress is called 7000 – what can I get today?
The 7000 was a medium stabilisation. We supply the new core in the closest level; if you want to lie more calmly, go up one level. Give us a quick call and we will sort it out in two minutes.
Do I have to replace the whole bed?
Very rarely. The foam frame, base board, safety liner and heater last much longer than the water core. Usually the mattress is enough, sometimes with a new cover.
Will a mattress from another waterbed fit?
Only if the inner dimensions, frame height and edge shape match. A straight-cut core in an angled-cut Coupé bed leads to folds and restless lying.
How long does a new water core last?
With regular care – conditioner as instructed, heater on all the time – ten to fifteen years is realistic.
Do you have a Bodytone bed and are unsure which part you need? Send us a photo at info@betten-conrad.de or call us: +49 6887 912 9180. We will tell you what fits – and what you can save.
